Grouting
Protekta Grip AB        Protekta Hydro Grout        Protekta MS        Protekta SS        Protekta Subsoil Grout SB  
 

Protekta Grip                                                                                                                              

Two component chemical grouting.

Protekta Grip AB injections are the safe sealing system against water ingress in above ground and underground structures and buildings. Protekta Grip AB is based on a 2-components resin, which is injected into pores, capillaries, cracks, joints, cavities and gravel beds and which polymerizes to an elastically neutral end product..

Uses

It can be used in pores, capillaries, cracks, joints, cavities honey comb, voids and gravel beds.

Advantages

•   A unique product based on injection system to treat complete center of damage
•   It is primarily used for basement, lift pits, swimming pools, water tanks etc., wherever leakage on account
    of hydrostatic pressure is to be checked

Application

1. The surface should be clean and free from dust, loose particles, oil and grease.
2. Protekta Grip A & Protekta Grip B are supplied as liquid, along with a white catalyst, accelerator and retarder (liquid).
3. Take Grip A in one container and Grip B in another container. Add the catalyst in Grip B
    (add 3 kg of catalyst in 50 kg of Grip B).

Dosage : 1L to 1.5 L / hole, depends on the requirement

Packing : 20L, & 50L(other sizes available upon request)

Protekta Hydrogrout                                                                                                 

A single component chemical grouting.

Protekta Hydro Grout is a revolutionary product which performs the same function as Protekta Grip AB, and which can be used with a normal grouting machine. Protekta Hydro Grout is injected directly into the heart of damaged area, Protekta Hydro Grout simplifies the procedure for those areas where water is not gushing out. In such cases we will have some time for the polymerization reaction and does not have to be completed within 30 seconds.

Uses

It can be used in pores, capillaries, cracks, joints, cavities honey comb, voids and gravel beds.

Advantages

•   The beauty of this product is that unlike earlier product it has got very good bonding with the surface and it does not
    get brittle in the absence of water
•   The injection machine needs only the greater pressure than that of water
•   The elastic end product, resulting from polymerization under appropriate pressure, grips the fabric by bonding with
    the substrate and the end product is physiologically neutral, totally insoluble and resists rotting and decomposition.
    Use in potable water container is unproblematic
•   Unlike so many other basement injections this is a safe polymer and does not affect ground water.
    Infact this product is produced on the same mechanism as is used for eye contact lens

Application

1. The surface should be clean and free from dust, loose particles, oil and grease.
2. It consists of a liquid and a catalyst. With the normal amount of catalyst, Protekta Hydro Grout would polymerize
    in 20 minutes. To increase polymerization time-simply reduces the amount of catalyst. The usage is about 1 ltr per hole.

Dosage : Depends on the requirement.

Packing : 20L, & 50L (other sizes available upon request)

Protekta MS                                                                                                                                 

Gelling catalyst for cement and clay.

Protekta MS is a catalyst to enhance cement or clay grouting especially to stop fast running water or in voids containing water. This specific formulation is suitable for all sorts of portland cement, pozzolanic materials and flyash.

Sometimes the void or the damaged area need low viscosity product which can be grouted and which interacts with the concrete or building material immediately. In such cases Protekta MS can be injected in pure form without any filler, in order of merit.

Uses

It can be used for grouting of voids, honey combs, tiles.

Advantages

•   This is a gelling agent added to speed up the setting of cement slurry
•   An excellent grouting catalyst to stop fast running water

Application

1. The surfaces should be clean and free from dust, loose particles, oil and grease.
2. Can be directly grouted as clear liquid or flowing cement grouting with cement grout or Protekta Subsoil Grout SB
    or followed by Protekta SS. Usual grouting machine used for cement.

For Soil :

•   Grouting should first be done with Protekta Subsoil Grout SB
•   This should be followed (quickly in the case of fast flowing water) by injection of MS directly or cement slurry
•   This should be followed by another injection with Protekta Subsoil Grout SB by the final injection with Protekta SS
    or cement slurry

Dosage : Depends upon surface

Packing : 20kg & 50kg (other sizes available upon request)

Protekta SS                                                                                                                                 

Gelling catalyst for cement and clay.

This relates to grouting method it is a clear liquid and can be grouted in wet conditions. This can also be added to cement slurry for fast setting.

In situation where waterproofing is required against fast running water, cementitious or clay grouts will not set as quickly as required in such situation such grouting can be enhanced by use of catalyst.

Protekta MS followed by Protekta SS offer excellent grouting in wet, water filled, fast flowing situation.

Uses

It can be used as a catalyst in cementitious grouting for all type of surfaces

Advantages

•   This should be followed (quickly in the case of fast flowing water) by injection of Protekta SS directly or Protekta MS
    cement slurry
•   This should be followed by another injection with Protekta SS or Protekta MS Cement Slurry
•   Grouting of voids, Honey combs, tiles
•   This is a gelling agent added to fast setting cement slurry consisting water and cement
•   It is used in combination with Protekta MS

Application

1. The surfaces should be clean and free from dust, loose particles, oil and grease.
2. Protekta SS is grouted by using grouting machine under different pressures and can be used against running
    water in conjunctive with Protekta SS.

Dosage : Depends on the substrate to be grouted.

Packing : 20L, & 50L (other sizes available upon request)

Caution : Highly alkaline product, use personal protection wear.

Protekta Subsoil Grout SB                                                                             

Clay based grouting agent.

Protekta Subsoil Grout SB is an injectable grout for consolidating subsurface soil. It is supplied as a brown powder that when injected into soil, enhances the strength and density and reduces permeability of the soil.

Protekta Subsoil Grout SB works by deep penetration and absorbing a tremendous amount of water.
As water is absorbed the grout swells to 15 times its original volume, pushes itself into cracks and voids, and stays in these areas permanently to seal against water entry.

Uses

Can be used at Subsoil surface like basement floor and retaining wall.

Advantages

•   It is very effective grouting material supplied in powder form
•   It is a chemical grout it can penetrate into final grained soils
•   It also helps in water seepage retardation
•   Absolutely non-pollutant and non-hazardous
•   Excellent product for soil voids, honey combs
•   Provide waterproofing characteristics and low strength structural improvement

Application

1. The surfaces should be clean and free from dust, loose particles, oil and grease.
2. For grouting, mix powder with clean water as per required grouting consistency.
3. Grout is to be injected every 1 ft along the area to be treated.

Dosage : Depends on the porosity of surface.

Packing : 25 kg & 50 kg bags. (other sizes available upon request)