Tiles / Tile Fixing
Protekta Tile-N-Fix    Protekta Tile-N-Grout  

Protekta Tile-N-Fix                                                                                                                                                                                      

A cementitious tile adhesive.

Protekta Tile-N-Fix is a ready to use composition of cement and special chemicals. It is an excellent non-shrink, self-curing, waterproofing, tile adhesive for fixing ceramic and mosaic tiles on horizontal and vertical surfaces.

Uses

It can be used as adhesive for all type of tiles.

Advantages

•   Ready to use
•   Good bonding
•   Good mechanical strength
•   Curing not required

Application

1. Surface should be cleaned to remove all loosely adhering particles, oil, grease, dust etc. Wet the surface by
   sprinkling water is essential.
2. Clean and dry the under surface of tile.
3. Apply the paste on prepared surface to an approx thickness of 3 mm (uneven surfaces may require more than
   3 mm thickness) and comb the surface with a notched trowel.
4. Place tiles in position within 15 minutes of mixing and press firmly with twisting movements. Use damp cloth to
   remove excess paste from tile surface.
5. Tile joints may be filled by Protekta Tile-N-Grout following day.
6. Allow atleast 2 days of drying before running water on tiles.

Dosage : 2.0-2.5 kg per sq. mtr/ 3mm thickness (or depending on surface)

Packing : 25kg, & 50kg (other sizes available upon request)

Protekta Tile-N-Grout                                                                   

A cementitious tile grout.

Protekta Tile-N-Grout is a cement based grout. Provided as a dry powder that can be made into a paste with water for use.

Uses

It can be used as grout for all type of joints in tiles, granites, and marbles.

Advantages

•   Makes the joint waterproof
•   Self curing
•   Non-shrink
•   Excellent adhesive

Application

1. Surface should be cleaned to remove all loosely adhering particles, oil, grease, dust etc. Wet the surface by
   sprinkling water is essential.
2. Make a paste with water to achieve desired consistency and applied to joint.

Dosage : 2.0-2.5 kg per sq. mtr./ 3mm thickness

Packing : 25kg,& 50kg (other sizes available upon request)