Water Repellents
Protekta G    Protekta C    Protekta PC1B
 

Protekta G                                                                                                                                         

A water-based water repellent.

Protekta G is a very effective water-based impregnant and supplied as two components that are to be combined. Upon application it binds to the surface and provides strong hydrophobicity to masonary surfaces.

Uses

It can be used for waterproofing of an extensive range of materials like concrete roof slabs, earth / mud / brick / cement block walls, asbestos-corrugated sheets, tiled roofs, sandstone walls and pavings, on terracotta and ceramic pavements.

Advantages

•   Easy to use product providing good water repellency
•   Does not alter the appearance of the treated surface
•   Porosity and vapour permeability of treated surface are unaffected
•   Emulsion paints can be applied to treated surface

Application

1. The surfaces should be clean and free from dust, loose particles, oil and grease.
2. Apply Protekta Base on dry surface as per application instructions.
3. Fill cracks and joints with crack filling material like Protekta 400 mortar, Protekta Crackseal or Protekta Flexjoint.
4. Protekta G is supplied as two liquid components as Protekta G and Heart. Just before application, add Heart into Protekta G
   and mix well. Use diluted product within 24hrs.
5. Spray Protekta G evenly using low pressure pump over the entire area to be waterproofed. Personal protection wear to
    be used.
6. Two wet-to-wet applications are to be given. Particular care should be taken to see that vertical surfaces are evenly wetted.

Dosage : 25-30 Sq.ft./L

Packing : 20L, 50L, & 200L (Other sizes available upon request)

Caution : Highly alkaline product,use personal protection wear.

 

Protekta C                                                                                                                                         

A water-based water repellent.

Protekta C is a water-based, totaly harmless, water repellent, design to protecting seafront structures (both old and new) against sodium chloride penetration-inhibits concrete cancer and reinforcing steel corrosion. It is supplied with Heart, to be mixed well just before use.

Uses

It can be used on all type of cementitious surfaces exposed to chloride environment.

Advantages

•   Easy to apply – saves on labour costs
•   Acrylic emulsion paint can be painted after treatment
•   Offers permanent waterproof protection
•   Porosity and vapour permeability of treated surface are unaffected
•   Unaffected by traffic
•   Surface appearance is unchanged

Application

1. The surface should be clean dry, and free from dust, loose particles, oil and grease.
2. Spray Protekta Base on dry surface as per application instructions.
3. Fill cracks and joints with Protekta STG (G) mixed with Protekta 500.
4. Spray Protekta C evenly under low pressure over the entire area to be waterproofed. Two applications are to be given.
    Particular care should be taken to see that vertical surfaces are evenly wetted.

Dosage : 25-30 Sq.ft./L

Packing : 20L, 50L, & 200L (Other sizes available upon request)

Caution : Highly alkaline product, use personal protection wear.
 

Protekta PC1B                                                                                                                   

An impregnant for clay tiles.

Protekta PC1B is an aqueous solution excellent water repellency product that offers deep penetration into and greater consolidation of surface.

Uses

It can be used for all type clay tiles and claddings.

Advantages

•   Easy to use product providing good water repellency
•   Does not alter the appearance of the treated surface
•   Porosity and vapour permeability of treated surface are unaffected
•   Emulsion paints can be applied to treated surface

Application

1. The surface should be clean, dry, and free from dust, loose particles, oil, and grease
2. Application ambient temperature should be between 10-30°C.
3. The liquid is sprayed evenly under low pressure over the entire area to be waterproofed.
    Two applications to be given. Particular care should be taken to see that vertical surfaces are evenly wetted.

Dosage : 25-30 Sq.ft./L

Packing : 20L, 50L, & 200L (Other sizes available upon request)

Caution : Highly alkaline product, use personal protection wear.