Protekta Plastofelt is a polymer modified bitumen that
is cold applied to the surface. Supplied as a brown thick paste that turns black
upon use as a surface coating. It is a highly elastic liquid-applied-waterproofing
-system based on a specially modified emulsion using bitumen and polymers.
Uses
Primarily used for water proofing of roofs, walls, and foundations.
Advantages
• Allows use of properties of bitumen
for waterproofing without taking away the disadvantages and toxicity associated
with using bitumen for waterproofing
• A highly elastic waterproofing and water resistant membrane
• Does not require preheating like normal
bitumen based coatings, thus eliminating fire and health hazards.
Application
1. The surface should be clean and free from dust, loose particles, oil and grease.
2. damaged spots should be repaired with Protekta 500 based mortar and Cracks should be
filled with Protekta crackseal.
3. Protekta Plastofelt can be applied by brush / roller.
4. Priming is recommended as this improves the adherence. Diluted 1:1 with water to use as primer.
5. Apply product in multiple coats, following recommended dosage.
6. Subsequent coats should be applied cross-wise to achieve even thickness of coating.
7. Allow sufficient drying between coats.
Dosage : 25 - 30 Sq.ft./Kg/coat
Sealing of New Roofs : 25 - 30 Sq.ft./L
Repair of Old Roofs :
• On roofing felt in reasonably good condition: 30-35 Sq.ft./Kg/coat - at least one layer
• On roofing felt in bad condition: 25- 30 Sq.ft./Kg/coa - at least two layers.
Packing : 20L, & 50L (other sizes available upon request)
Protekta Elastofelt is a highly elastic, cold applied,
water-based, bituminous waterproofing system. It is specially modified bitumen with
SBS or SBR polymers have been used to specially modify bitumen to enable cold
application and enhance features. This coating offers a highly elastic waterproofing
and water resistance membrane.
Uses
It can be used for sealing of new roofs, waterproofing of foundations,
retaining walls, roofs, balconies, terraces, parking garages,
asbestos concrete roofs, and decks against surface water, swimming pools
and bridges in contact with soils.
Advantages
• Easy to apply
• ready to use, cold applied coating, which does not require torching like other bitumen coating.
• Eliminates fire hazard as well as exposure
to toxic fumes generated by heating bitumen
Application
1. Surface preparation should be done by cleaning the surface
to make it free from dust, loose particles, oil and grease.
2. Any damaged spots should be repaired with Protekta 500
based mortar and cracks should be filled with Protekta
Crackseal.
3. The surface should be primed with 1:1 diluted Protekta
Elastofelt as this improves adherence.
4. Two coats should be applied with a sufficient drying
of surface between coatings.
5. Apply coats cross-wise to achieve even thickness of
coating.
Dosage : 25 - 30 Sq.ft./L
Sealing of New Roofs: 25 - 30 Sq.ft./L
Repair of Old Roofs :
• On roofs in reasonably good condition: at least one layer of 30-35 Sq.ft./L
• On roofs that are in poor condition: at least 2 layers of 25 to 30 Sq.ft./L
• For traffic areas should be covered by a layer of screed
Packing : 20L, & 50L, (other sizes available upon request)
