A hydrophobic waterproofing
admixture for concrete / plaster.
Protekta Emulsion KR-2 is a white liquid,designed to
be a part of the water content of the concrete mix that when added into concrete/plaster
mix, results in excellent water repellency of the concrete/plaster. Specially formulated
silane - siloxane emulsion, it is solvent-free and water based. It easily mixes with concrete/plaster,
gets permanently bonded with the concrete/plaster and cannot be washed out.
Uses
It can be used for freshly made concrete and mortar, RMC, manufacture of low slump
cement/concrete blocks, concrete pavers, & precast cement products.
Advantages
• Reduces water absorption over 80% in treated concrete/mortar/plaster
• Creates hydrophobic chloride & carbon dioxide resistant substrate
• Leaves no staining or oily residue
• Non-flammable, non-corrosive, and non-hazardous
Application
1. The surface should be clean, free from dust, loose particles, oil, and grease.
2. Mix the dry concrete components of concrete or mortar
3. Take the required volume of Protekta Emulsion KR-2 based on suggested dosage (below).
Shake well and mix with gauging water : Quantity of
water should be as per water cement ratio of mix design.
4. Add the above solution to the dry mix to attain the desired consistency.
Dosage : 125 ml of Protekta Emulsion KR-2 for 50 kg of cement.
Packing : 5L, 20L, & 50L (other sizes available upon request)
A concrete waterproofing
admixture and super plasticizer.
Protekta GL-5 (M) is a concrete/mortar admixture, supplied
as a brown liquid, designed to be a part of the water content of the concrete mix.
It is formulated to have combined silane and polycarboxylate properties to provide
required workability and waterproofing of concrete. By reducing the w/c ratio it
allows for denser concrete. An admixture to increase workability and make waterproof
freshly made concrete and mortar.
Uses
It can be used for RMC, manufacture of low slump cement/concrete
blocks, concrete pavers, & precast cement products.
Advantages
• High workability without segregation, requires less vibration
• Reduces the w/c ratio
• Marginally increases the compressive strength
• Reduces water absorption over 80% in treated concrete/mortar/plaster
• Creates hydrophobic chloride & carbon dioxide resistant substrate
• Improves surface finish during self-leveling
• Non-flammable, non-corrosive, and non-hazardous
Application
1. The surface should be clean, free from dust, loose particles, oil, and grease.
2. Mix the dry components of concrete and mortar.
3. Take the required volume of Protekta GL-5(M), based on suggested dosage (below).
Shake well and mix with dry concrete components.
4. Add water according to mix design to attain the desired consistency.
Dosage : 0.6% of quantity of cement in mix design.
Packing : 20L, 50L, & 200L (Other sizes available upon request)
